I can't get 30 feet – OtO Lawn

OtO's max reach (radius) in a single direction should be 30 feet.

Note that OtO does not have a pump inside. Therefore, its reach is highly dependent on your source water pressure.

In order to reach 30 feet:

Your water source should be open all the way
Your water source must be at least 50 PSI (at hose end, i.e. the end of the hose that you use OtO)
Use only a heavy duty rubber hose that is 5/8" or better yet, 3/4"
Avoid unnecessary connectors, splitters, coils or bends in the hose

There are several factors that influence how far OtO is able to water. Consider the following in order to reduce water pressure and flow rate loss:

Check that the water source is turned on all the way.
Ensure there are no kinks or sharp turns in the hose.
Remove any quick connectors or other objects that may cause restrictions along the line.
Keep hose short. We recommend a hose that is less than 50 feet in length.
Use a wider hose. We recommend a high-quality hose with an 5/8 inch ID or greater.
Consider your water pressure. OtO is only able to reach 30 feet with a water pressure of 50 PSI or greater.
Check your home's pressure regulator

How can I increase my water pressure?

You can sometimes increase your home's water pressure at your pressure regulator.

Check out the video below to learn how to do this!