In case you need to move your OtO to a different location or put it away for storage, follow the guide below to remove OtO from the mounting bracket.
- Make sure the spigot / tap is turned off.
- Turn the collar at the inlet on OtO to loosen the fitting and detach the hose
- Look underneath the bracket and locate four (4) claw-shaped thumb screws.
- Squeeze one of the thumb screws and pull firmly at a slight angle. OtO will pull apart from the bracket.
Watch this video to see how to do this easily!
Don't hesitate to reach out to firstname.lastname@example.org should you have any difficulties.
Having trouble detaching the hose? Read this.